KTM Power Parts 62011042044 Manual Del Usuario página 6

6
1
ACC1
ACC2
A
- Mount the power socket.
- Mount the trim (1).
- Open the panel on the right side of the motorcycle.
- Route the cable (1).
NOTE:
Route the cable from the left to the right with the wiring harness.
- Connect with ACC1 or ACC2 (figure A).
NOTE:
ACC1 - Current via permanent positive.
ACC2 - Current via ignition.
- Connect with power socket.
- Close the panel.
NOTE:
If possible, thread the cable into the spiral hose.