10
2
3
6 7
4
A
4
3
Scope of delivery:
11
12
1x brake disc lock(1)
1x protection bolt(2)
1x locking bolt(3)
2x keys (4)
9
8
1x carabiner (5)
2x spacers ø18x10.5x15.25 (690Duke/R, 690SMC/R) (6)
2x spacers ø18x10.5x16.25 (RC8/R) (7)
2x spacers ø18x10.5x17.2 (990SD/R) (8)
2x spacers ø18x10.5x19.2 (990SM/T/R) (9)
1
2x screws M10x1.25x80 (RC8/R) (10)
2x screws M10x1.25x90 (990SD/R) (11)
2x screws M10x1.25x85 (990SM/T/R, 690SMC/R) (12)
- Remove the original screws (13) of the brake caliper.
- Position the shackle (1) (included), insert the spacers (A) (included) and
13 B
NOTE:
Which spacers and screws are used depends on the particular vehicle.
The same tightening torque applies for screws (B) as for the original screws
13 B
(see the Owner's Manual).
C
Use
- Remove the protector (2) and insert the locking bolt (3).
- Push the motorcycle back and forth a small distance until the bolt enga-
- Lock and unlock the lock with the key at position (C).
To be able to reorder a key, you must register your Roadlok.To do this, you
require the VIN of your motorcycle and the serial number of the key, which
is located on the tag on the key ring.
This can be performed at the customer service center under +43 (0) 800
802057 or at www.roadlok.com
International customer service: +43 (0) 800 802057
USA customer service: +1 (888) 762-3565
mount the shackle with the screws (B) (included).
(A)
690Duke/R from MY 2008
RC8/R from MY 2008
1290Duke/R from MY 2014
690SMC/R from MY 2008
990SD/R from MY 2005
1190Adv from MY 2013
990SM/T/R from MY 2005
(B)
690Duke/R from MY 2008
690SMC/R from MY 2008
RC8/R from MY 2008
1290Duke/R from MY 2014
1190Adv from MY 2013
990SD/R from MY 2005
990SM/T/R from MY 2005
ges in the brake disc.
NOTE
Spacer ø18x10.5x15.25 (6)
Spacer ø18x10.5x16.25 (7)
Spacer ø18x10.5x16.25 (7)
Spacer ø18x10.5x16.25 (7)
Spacer ø18x10.5x17.2 (8)
Spacer ø18x10.5x17.2 (8)
Spacer ø18x10.5x19.2 (9)
Screw M10x1.25x85 (12)
Screw M10x1.25x85 (12)
Screw M10x1.25x80 (10)
Screw M10x1.25x80 (10)
Screw M10x1.25x80 (10)
Screw M10x1.25x90 (11)
Screw M10x1.25x85 (12)