Alpha IP WTH 61001 Guia De Inicio Rapido página 18

Commissioning
Ö The Alpha IP Access Point has been set-up via the Alpha IP app (see manual HAP
21001).
1. Open the Alpha IP app on your smart phone.
2. Select the menu item Teach-in device.
3. Pull the room control unit Display S from the interchangeable frame (see page
4 fig. 5).
4. Remove the insulating strip from the battery compartment. The teach-in mode is
automatically activated for three minutes.
The teach-in mode can be activated manually with the system key (see D in fig. 1) for
a duration of 3 minutes.
5. The device will be displayed automatically in the Alpha IP app.
6. For confirmation, enter the last four digits of the device number (SGTIN) or scan
the supplied QR code. The device number can be found below the QR code or
in the battery compartment.
The LED will light up in green after a successful teach-in process. The pro-
cess must be repeated if the LED lights up in red.
7. Follow the directions of the app.
18