Other Information For This Machine; Laws And Regulations - Ricoh P C600 Información De Seguridad

3. Other Information for This Machine

Laws and Regulations

Duplication and Printing Prohibited
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports,
driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility
for its completeness or accuracy. If you have any questions concerning the legality of copying
or printing certain items, consult with your legal advisor.
Laser Safety
Laser Safety
This machine complies with the requirements of IEC 60825-1:2014 (EN 60825-1:2014)
for class 1 laser product. This machine contains multiple AlGalnP laser diodes, 660-680
nanometer wavelength for each emitter. The beam divergence angle is 16 degrees(minimum)
and 24 degrees(maximum) in the vertical direction, and 7 degrees(minimum) and 13
degrees(maximum) in the horizontal direction, and laser beams are generated in Continuous
Wave(CW) mode.
The following label is attached to the back of the machine.
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
10
Overseas Affiliates and Noise Emission Information
In accordance with TUV "GS Symbol" requirements, details of the EU office or representative
company are given below.
Overseas Affiliates
Ricoh Europe SCM B.V.
Blankenweg 24, 4612 RC Bergen op Zoom, The Netherlands
Noise Emission
User Information on Electrical and Electronic Equipment
(For Users in India)
This product including components, consumables, parts and spares complies with the "India
E-waste Rule" and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions set in the Rule.
EMC Directive
Installing the Ferrite Core
An Ethernet interface cable connected to the USB Device Server Option port with a ferrite
core must be used for RF interference suppression.