Agc; Important; Auto Level - Triax TMB 200 Manual Del Usuario

Programmable Multiband Amplifier
TMB 200 & TMB 200S

AGC

p
AGC
Menu
p
Auto

Auto Level

Menu
117
p
• Unit in standby mode, push a button to reach the SETTINGS/Config menu.
Press the  button until the display shows the AGC menu.
•
• Press Menu button to enter the function
•
Press the buttons + or - to select on or off
•
Confirm by pressing Menu

IMPORTANT!

• AGC: The unit memorizes the average output level. A variation of ± 1 dB triggers the function
and compensates the variation within gain and attenuation limits
• AGC mode hides all other menus. To modify the parameters, switch the AGC mode to OFF
Auto level
Unit in standby mode, push a button to reach the SETTINGS/Config menu.
•
• Press the  button until the display shows the Auto menu.
• Press Menu button to enter the function
•
Press the buttons + or - to select the output level value
•
Confirm by pressing Menu
IMPORTANT!
• The unit memorizes the selected output level, the function try to reach the value within input,
gain and attenuation limits.
Note: Setting of VHF level is not automatic.
awi -july 14
+
AGC
AGC
-
OFF
ON
Error code
+
AUTO lvl
Menu
-
117
16
Menu
Wait
.
TMB 200-V1