System Menu; System Menu Access; Firmware Update; Factory Reset - Triax TMB 200 Manual Del Usuario

Programmable Multiband Amplifier
TMB 200 & TMB 200S
Connect your USB cable between the unit and the keypad. After boot process the display shows
TMB200/Setup and the LED in on. Press a button to access the menus.
Keypad in standby mode (the display shows time and date), press a button to access the menus.

System menu

This allows to:
• show firmware version
• update the firmware
• go back to factory settings
• import or export a configuration
• limit the UHF channels at channel 60
• display the internal temperature
• set clock and date
Press the Menu button a while to quit the System Menus.

System menu access.

• Keypad in standby mode, press a button to access to SETTINGS/Config.
• Press the Menu button to access to system menu.
• Display shows the firmware version
Settings
Menu
/ Config
p
To scroll through the other menus, use  or  buttons.

Firmware update.

Settings
Menu
/ Config
p
• scroll through the menus with button  or  until display shows Firmware upload
Press Menu button to start the function
•
• Select the file name (an USB stick must be connected on the keypad and a DTMB_00x file must
be available in root directory)
• Confirm by pressing Menu
• Wait until display shows Firmware upload
Notes:
• side 8 : how to get the System menu.
• Press the Menu button a while to quit the System Menus.
awi -july 14
Firmware
14a23
p
Firmware Firmware
Menu
upload DTMB_00x
p
Factory Factory
Menu
Reset wait
p
Firmware
14a23
p
Firmware Firmware
Menu
upload DTMB_00x
p
Factory Factory
Menu
Reset wait
p
Firmware 14a23
Firmware upload

Factory reset

Import/Export
LTE 21-60
Temp.
Clock Setup
Firmware
Menu
wait
Firmware
Menu
wait
8
Firmware Firmware
[ == > ] Complete
Firmware Firmware
[ == > ] Complete
TMB 200-V1