Before Testing; Calibration For Ketone Testing; How To Code Your Meter (Β-Ketone Test) - Fora 6 Connect Manual Del Propietário

BEFORE TESTING

Calibration for Ketone Testing

You must calibrate the meter every time you begin to use a new vial of
β-Ketone test strips by setting the meter with the correct code. Test
results may be inaccurate if the code number displayed on the monitor
does not match the number printed on the strip vial.
How to Code Your Meter (β-Ketone test)
12
1. Insert the code strip when the
monitor is off. Wait until the code
number appears on the display.
NOTICE:
 Make sure the code number on display,
code strip, and the individual foil package are
the same. The code strip should be within the
expiration date; otherwise, an error message
may appear.
2. Remove the code strip, the display
will show "OFF". This tells you that the
meter has finished coding and is ready
for a β-ketone test.