Performance Chevrolet Camaro SG3 Instrucciones De Instalación página 14

Caution: This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener
when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or
component.
4. Install lower rear shock absorber bolt (1) >> Install New Supplied Bolt
Final Torque
First Pass: 100 N·m (74 lb ft)
Final Pass: 90–105 degrees
5. Remove the adjustable support stand or jack from the lower control arm.
6. Install Suspension Lower Control Arm Cover (2)» Using the appropriate tool, install the push pin fasteners (1) on the lower
control arm cover.
Chevrolet Camaro SG3 Sport Suspension
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84188729
REV 01JN16
PART NO.
DATE
10AU15 Initial Release - Thomas Gierman
01JN16 Revision - Andrew Rogers
14
SHEET
REVISION
48
OF
AUTH
2117284
2484395