Wheel Alignment - Performance Chevrolet Camaro SG3 Instrucciones De Instalación

14. A rear wheel alignment is necessary following the installation of the SG3 kit. Use the supplied Toe Link Inner Bolt (1), Cam
Washer (not shown) and Nut (not shown), when completing the wheel alignment.
Do not apply final torque at this time. Final torque should be applied during wheel alignment procedure.
Final Torque
First Pass: 70 N·m (52 lb ft)
Final Pass: plus 90-105 degrees
After installation of the SG3 Lowering Kit has been completed front and rear, a wheel alignment will need to be completed.
This alignment should be completed to production specifications for your vehicle.
Chevrolet Camaro SG3 Sport Suspension
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.

Wheel Alignment

REV 01JN16
PART NO.
DATE
10AU15 Initial Release - Thomas Gierman
01JN16 Revision - Andrew Rogers
84188729
SHEET
REVISION
16 48
OF
AUTH
2117284
2484395