Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
18-901 Universal Drill Press Table Fence
DEFINITIONS - SAFETY GUIDELINES
indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE:
used without the safety alert symbol indicates potentially
hazardous situation which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY BIESEMEYER ACCESSORY, CALL US TOLL
FREE AT 800-223-7278.
SAFETY INSTRUCTIONS
To reduce the risk of injury, read the tool
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury
and serious damage to the tool and the accessory. When
servicing this tool, use only identical replacement parts.
To reduce the risk of injury, turn tool off and
disconnect it from power source before installing and
removing accessories, before adjusting or when making
repairs. An accidental start-up can cause injury.
Always wear certified safety equipment: ANSI
Z87.1 eye protection (CAN/CSA Z94.3) with side shields.
DRILL PRESS FENCE CONTENTS (FIG. 1)
Check the contents of your Biesemeyer 18-901 Drill Press Table
Fence carton to make sure you received all the parts. In addition
to this instruction sheet, the carton should contain:
A.
Fence body
B.
(2) Mounting clamp assemblies
C.
Low-profile flip stop assembly
D.
High-profile flip stop extension
E.
Knurled thumb screw for high-profile flip
stop extension assembly
RECOMMENDED TOOLS FOR ASSEMBLY
•
Phillips screwdriver
ASSEMBLY
For your own safety, read the tool instruction
manual before using any accessory. Failure to heed these
warnings may result in personal injury and serious damage
to the drill press and the accessory. When servicing this
tool, use only identical replacement parts.
NOTE: The drill press fence can be mounted in a high-profile
(F) Fig. 2 or a low-profile (G) setup. Low profile may be
advantageous if the holes to be drilled are close to the edge of
the board or for narrow pieces.
FIG. 1
A
FIG. 2
F
G
FIG. 3
J
C
B
B1
H
I
B2
D
E
B1
Publicidad
Tabla de contenido
Resumen de contenidos para Biesemeyer 18-901
- Página 1 Z87.1 eye protection (CAN/CSA Z94.3) with side shields. DRILL PRESS FENCE CONTENTS (FIG. 1) Check the contents of your Biesemeyer 18-901 Drill Press Table Fence carton to make sure you received all the parts. In addition to this instruction sheet, the carton should contain: FIG.
- Página 2 FIG. 4 FIG. 5 NOTE: This fence comes equipped with T-bolts which will work on drill press table with parallel T-slots sized between FIG. 6 5/8” to 13/16”. If your table has a different size T-slot, the slots are not parallel or it does not use T-slots, additional hardware or clamps may be required. If the T-slots are not parallel, they can’t be used and the fence must be clamped instead.
-
Página 3: Replacement Parts
SERVICE hours/day. REPLACEMENT PARTS You can also write to us for information at BIESEMEYER, 4825 Use only identical replacement parts. For a parts list or to order Highway 45 North, Jackson, Tennessee 38302-2468 parts, visit our website at www. deltaportercableservicenet. - Página 4 FIVE YEAR LIMITED NEW PRODUCT WARRANTY or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed BIESEMEYER will repair or replace, at its expense and at by BIESEMEYER. For further detail of warranty its option, any new BIESEMEYER machine, machine part,...
- Página 5 (D) à l’arrière du dispositif de la butée articulée Pour l’assistance avec votre outil, visiter notre site web horizontale (C), comme illustré en fig. 6. à www.biesemeyer.com pour une liste de centres de Assemblez les deux parties (C) et (D) à l’aide d’une maintenance ou appeler la linge d’aide de BIESEMEYER vis à tête moletée (E).
- Página 6 Web GARANTIE LIMITÉE DE CINQ ANS pour les informations relatives à cette garantie. BIESEMEYER réparera ou remplacera, à ses frais et à sa discrétion, toute nouvelle machine BIESEMEYER, pièce de REMPLACEMENT GRATUIT DE L’ETIQUETTE rechange ou tout accessoire qui, dans des circonstances d’utilisation normale, s’est a véré défectueux en raison de...
-
Página 7: Contenidos De La Guía De La Prensa De Taladro (Fig. 1)
Revise el contenido de la caja en la que vino su Guía para largo de dos ranuras en T (L) en la mesa. la mesa de la prensa de taladro Biesemeyer 18-901 para Deslice la guía (A) a izquierda o derecha para colocarla verificar que recibió todas las piezas. Además de este manual... -
Página 8: Operación
(E) y la Puesto accesorios extensión del tope rotativo de perfile alto (D) de la unidad de excepción de ésos ofrecidos por BIESEMEYER no se han tope rotativo de perfil bajo (C). probado con este producto, el uso de tales accesorios CÓMO CONECTAR EL TOPE ROTATIVO A LA GUÍA (FIG. -
Página 9: Garantia
BIESEMEYER, con un comprobante de compra del producto, dentro del plazo de cinco años y dé a BIESEMEYER una oportunidad razonable... - Página 10 BIESEMEYER, 99 Roush St. Anderson (800) 223-7278 www.biesemeyer.com • Copyright © 2010 BIESEMEYER Revised 6/12/2015...