Motor Mounting Bracket Hanging Options - Ceiling Or Wall Mount - Fanimation Punkah Manual Del Propietário

Motor Mounting Bracket Hanging Options - Ceiling or Wall Mount

INSTALLATION NOTE
The following illustrations serve as a guide on mounting
and securing your motor assembly either to the ceiling
or to the wall. Building structure designs will vary
depending on the local building codes. Be sure of your
layout plans before fastening your motor assembly
unit.
NOTE: The ceiling / wall panels removed to clarify
structural support set-up.
NOTE: Use any of two sets of non-threaded holes that
line up over the stud or joist.
Please choose one of the hanger options for your motor:
Option 1 - Wall Mount Detail (Figure 4)
Position mounting plate over outlet box so that two of the
bolts holes will be positioned over a wall stud. Use the
two 2" long lag bolts to attach the mounting plate to the
wall stud.
Option 2 - Ceiling Mount Detail 1 (Figure 5)
Position mounting plate over junction box so that two of
the bolts holes will be positioned over a ceiling joist. Use
the two 2" long lag bolts to attach the mounting plate to the
ceiling joist.
Option 3 - Ceiling Mount Detail 2 (Figure 6)
Position mounting plate over junction box in the desired
position. Use the two 4" lag bolts to attach the mounting
plate to the cross-member support beam that the junction
box is mounted to.
Wall Mount Detail
Wall Stud
2˝ Lag Bolt
(2 places)
Ceiling Mount Detail 1
Ceiling
Joist
2˝ Lag Bolt
(2 places)
Ceiling Mount Detail 2
Cross-member
support beam
Ceiling Joist
6
Threaded Hole
(4 places) - for
motor mount
Outlet
Box
Figure 4
Threaded Hole
(4 places) - for
motor mount
Junction
Box
Figure 5
4˝ Lag Bolt
(2 places)
Threaded Hole
(4 places) - for
motor mount
Junction
Box
Figure 6