Loading Plu; Modify Plu - Baxtran IKP Serie Manual De Usuario

IKP model
EXAMPLE
Press
1. Press , now
2. Press , PLU indicator shows 3, and
3. Press again, PLU digits shows 15 instead, and
4. Press , after the beep, the piece weight for PLU 15 is now set as 0'5 gram.
Steps in setting PLU, 0~999
1. Set up piece weight as in Sampling Operation section
2. Press and you will see
3. Press the numeric keys to select PLU number.
4. Press to save your setting.
If there is no data input in 30 seconds, scale exits the PLU setting mode and returns to normal weighing
mode.

LOADING PLU

Steps in loading PLU, 1-24 keys
1. In weighing mode, press any key from direct PLU keys to access the PLU memory of the key's lower-
right set.
2. Press the same key again to access the PLU memory of the key's upper-left set.
EXAMPLE
1. Press one time, the 3rd1. Press PLU is loaded. The LCD shows 3 below
2. Press again. The 15th PLU memory is loaded. The LCD shows 15 below
Steps in loading PLU, 0-999
1. In weighing mode, press and hold
2. Use the numeric keys to input the desired PLU number and press

MODIFY PLU

1. When is shown on the display, press
2. Set up piece weight according to the previous section and press
OPERATION OF M+
1. When there is a load on the weighing pan and piece weight has been input, press
a beep, lights up on the LCD, indicating a data has been recorded.
2. Clear the load. Put another load on the weighing pan, and then press
lights up, indicating second data has been recorded.
After each recording, if the load on the weighing pan is not cleared, pressing
beep and the scale won't be able to record the next weighing result.
The stored memory can memorize up to 180 weighing results.
, to enter piece weight as 0'5 gram
is flashing on the display.
flashing on LCD.
stops flashing on LCD.
until it emits a double beep then release.
now flashing.
flashing.
and the piece weight starts flashing.
to save your settings.
User's Guide
.
.
to load the reference PLU.
. When you hear
. After a beep sound,
will result in the long
35