Tripp-Lite LR1000 Manual Del Propietário página 2

200407139 93-2268 230V Line Conditioner owners manual.qxd
Safety
This manual contains important instructions and warnings that should
be followed during the installation, operation and storage of all Line
Conditioners.
Line Conditioner Location Warnings
• Install your Line Conditioner indoors, away from excess moisture or heat, dust or
direct sunlight.
• For best performance, keep the indoor temperature between 0° C and 40° C
(between 32° F and 104° F).
• Leave adequate space around all sides of the Line Conditioner for proper ventilation.
Line Conditioner Connection Warnings
• Connect your Line Conditioner to a three-wire, grounded AC power outlet. Do not
remove or modify the ground pin of the Line Conditioner's plug.
• Do not use two-prong adapters with the Line Conditioner's plug. Do not plug your
Line Conditioner into itself; this will damage the Line Conditioner and void your
warranty.
• If you are connecting your Line Conditioner to a motor-powered AC generator, the
generator must provide clean, filtered computer-grade output.
• Use care when connecting country-specific plugs to selected 220/240V, 50/60 Hz
Line Conditioners. Hot 1 and Hot 2 may be reversed. When using a French CEE7/7
plug, always use the separate grounding pin supplied with the unit. When using a
Schuko CEE7/4 plug, an ungrounded condition will exist unless separate grounding
to the rear of the Line Conditioner is provided by the user.
Equipment Connection Warning
• Do not use Line Conditioners for life support applications in which a malfunction or
failure of a Line Conditioner could cause failure or significantly alter the
performance of a life-support device.
Line Conditioner Maintenance Warning
• Line Conditioners require no maintenance. Keep the Line Conditioner dry at all
times. DO NOT open the unit for any reason.
2
8/25/2004 4:32 PM Page 2