Operation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 - Royal Sovereign RBC-100P El Manual Del Propietario

OPERATION
1. Make sure that there are 4 AA batteries in the unit, or plug in the AC/DC adaptor. Open the cover and the display will automatically
show "0". Attach the bill guide. ( See Parts image for correct placement)
2. Select counting mode.
Common counting mode
Common counting will count all of the bills into the hopper. To begin, neatly place a stack of bills into the hopper on the right side of
the hopper plate. This will hold the bills in place. The hopper can hold up to 120 old bills or 150 new bills. Press the start button to
begin counting. The counted bills will fall into the cover. The number of bills counted will be shown on the display.
Batch counting mode
Batch counting mode will count the bills into a preset batch amount. The bill counter can batch from 1-100. To use batch mode, press
the batch button. A red dot will turn on in the bottom right corner of the display showing the batch function is on and the display will
read 100.
This means that the machine will count the bills in batches of 100. Press the batch button a second time to get 50 on the display to
count in batches of 50. Press the batch button a third time to get 20 on the display and count in batches of 20. Press the batch
button a fourth time to get 10 on the display and count in batches of 10.
8