Maintenance And Care - CAPITAL SPORTS 10032020 Manual Del Usuario

Function keys
The training computer has 3 function keys: Reset, Mode and Set.
Reset key: Resets the selected value to 0.
Mode key: Selection of the individual training values. At the touch of a button,
the next value can be selected from top to bottom. The selected value will
blink.
Set key: With the set key, you can set target values for training. You can
choose between training time (Time), distance traveled (Dis.), and calories
burned (Cal.). To set the values, change to "Mode" with the desired value and
then press the "Set" key until you reach the desired setting. Each time the
button is pressed, the value will change as follows:
• Time: + 1:00 minute
• Dis .: + 0.1 km
• Approx .: + 1 kcal
As soon as you start training, the set values will be counted down. As soon as
the value reaches 0, a beep will sound. If you have set several values, values
that reached 0 start counting up again.

MAINTENANCE AND CARE

As with all exercise equipment with mechanical, moving components, the
screws of the water rowing machine can also loosen due to frequent use.
We therefore recommend that you check them regularly and, if necessary,
tighten them with a suitable key. So that the water remains algae-free, it is
recommended to add a commercially-available 20 g quick-dissolving chlorine
tablet to the tank every 2-3 months.
For low-noise training, it is important to keep the moving parts such as the
cable pull, rollers and track as free of dirt as possible. You can easily clean the
cables with a vacuum cleaner. The rollers and rails can be wiped with a damp
cloth. Please do not use harsh detergents as these may attack the plastic
surfaces.
EN
25