STEP 3:
Attach P4 End Leg Panels and P5 Side Leg Panels onto P2 Left Legs and P3 Right Legs using pre-drilled pilot
holes with H4 Screws as shown in FIGURE 3. Tighten, but do not strip out H4 Screws.
NOTE: Temporarily unhook P15
Soccer Net to install P4 End Leg
Panels and P5 Side Leg Panels.
Reattach P15 Soccer Net to hooks
when all leg panels are installed.
P3
P4
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
STEP 4:
Attach P6 Puck Catchers using H4
Screws using pre-drilled pilot holes
with H4 Screws as shown in
FIGURE 4.
Tighten, but do not strip out H4
Screws.
All Rights Reserved.
© 2012 Escalade Sports
8 pcs - H4 Phillips Round Head Screw
8 pcs - H5 Phillips Round Head Screw
NOTE:
Soccer Net
opening goal
this side.
P2
H4
PARTS REQUIRED:
2 pcs - P4 End Leg Panel
2 pcs - P5 Side Leg Panel
P2
H4
P5
IMPORTANT NOTE:
Basketball assembly holes
in this position.
6 pcs - H4 Phillips Round Head Screw
2 pcs - P6 Puck Catcher
P6
7
NOTE: Temporarily unhook P15
Soccer Net to install P4 End Leg
Panels and P5 Side Leg Panels.
Reattach P15 Soccer Net to hooks
when all leg panels are installed.
P3
P4
NOTE: P4 End Leg Panel
packed under the table
H5
cabinet.
P5
FIGURE 3
PARTS REQUIRED:
FIGURE 4
For Customer Service Call 1-888-996-2729
P6