8 pcs - H5 Phillips Round Head Screw
4 pcs - H7 Phillips Round Head Bolt
4 pcs - H8 Lock Nut
STEP 5:
Attach P11 Rims from the back of P8 Backboard
using H5 Screws as shown in FIGURE 5.
Tighten, but do not strip out H5 Screws.
IMPORTANT NOTE:
The rim must fold up on backboard, and
the smooth part of the circular rim must
face up.
If this is not possible, simply unsnap the
4 screw rim bracket from the rim and
reverse it back onto the rim.
STEP 6:
Attach P10 Straight Tubes at the back of P8 Backboard using H7 Bolts with H8 Lock Nuts as shown in FIGURE 6.
Tighten H8 Lock Nuts using T2 Wrench.
Attach each P12 Rim Net onto each P11 Rim as shown in FIGURE 6.
T2
P8
H8
H8
All Rights Reserved.
© 2012 Escalade Sports
PARTS REQUIRED:
NOTE:
Graphic on
this side.
H8
H7
H7
P10
1 pc - P8 Backboard
2 pcs - P10 Straight Backboard
Support Tube
P11
FIGURE 5
H7
H7
P10
FIGURE 6
8
2 pcs - P11 Rim
2 pcs - P12 Rim Net
1 pc - T2 Wrench
P8
NOTE: P8 Backboard
packed under the table
cabinet.
H5
DO NOT OVERTIGHTEN
H5 SCREWS
P11
For Customer Service Call 1-888-996-2729
P11
H5
P12
Rim Net