Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
can detrimentally affect the refrigeration unit. All units should be plugged into a grounded and properly-sized
electrical outlet with appropriate overcurrent protection. Please refer to the electrical requirement on the
nameplate. Please make sure that your unit has its own dedicated outlet. Do not use an extension cord.
Please pay close attention to the safety notices in this section. Disregarding these notices may lead to
serious injury and/or damage to the unit.
ATTENTION
•
To minimize shock and fire hazards,be sure not to overload outlet. Please designate one outlet for your
unit.
•
Do not use extension cords.
•
Do not put your hands under the unit when the units is required to be moved.
•
When the unit is not in use for a long period of time,please unplug the unit from the outlet.
•
After unplugging the unit,wait at least 10 minutes before re-plugging it. Failure to do so could cause
damage to the compressor.
UNPLUG CORD
•
To minimize shock and fire hazards,please do not plug or unplug the cord with wet hands.
•
During maintenance and cleaning,please unplug the unit.
PROPER GROUNDING REQUIRED
•
To minimize shock and fire hazards,make sure that the unit is properly grounded.
PROHIBITION
•
Do not attempt to remove or repair any component unless instructed by factory.
•
Make sure that the unit is not resting on or against the electrical cord and plug.
•
To minimize personal injury,do not hang on the doors.
•
Do not store any flammable and explosive gas or liquids inside the unit.
•
Do not attempt to alter or tamper with the electrical cord.
5
Installation
Safety
Publicidad
Tabla de contenido
Solución de problemas
