Delay - Electrolux EDW5505ESS Guía De Uso Y Cuidado

Cycles, Options & Lights

DELAY

The Delay option can be used to automatically start the cycle at a later time to
reduce daytime heat buildup in the home or to take advantage of reduced energy
costs if available in your area. This option is also useful for conserving hot water
at times of high household usage (showers, laundry).
To set up a Delay:
1. Select the appropriate cycle and options for the load. Close the door.
2. Press the Delay pad until the desired amount of delay time is selected.
3. The Delay indicator will flash until the START/Cancel pad is pressed.
4. As soon as the START/Cancel pad is pressed, the flashing will stop and the
delay time will begin counting down. The Delay indicator will remain lit until
the delay time has counted down.
5. The cycle will automatically start as soon as the delay time expires.
IMPORTANT
If 30 seconds elapse between setting the cycle and options and pressing the START/
•
Cancel pad, the dishwasher will turn off.
To cancel a Delay:
When the delay is counting down, press the Delay pad again. The indicator light
will go out and the cycle will start or resume immediately.
To cancel a Delay and the cycle:
• Press START/Cancel once to drain and turn off the dishwasher.
Or
• Press START/Cancel twice to turn dishwasher off without draining.
19