Springer RQ Serie Manual Del Usuario E Instalación página 13

This option can be viewed on sis LEDs on the electronic
panel, as shown on the table on the right:
!
Note:
VENT.
• on
remain off.
• the electronic panel will "BEEP" twice if the tempera-
ture range is exceeded.
VELOC.
By pressing the SPEED keys, you select the desired FAN
ALTA
SPEED.
BAIXA
ALTA
will operate at top fan speed, regardless of temperature
mode.
BAIXA
will operate at minimun fan speed, regardless of tem-
perature mode.
By pressing the "TIMER" keys you can set the unit's operation
time until it is automatically turned off. You can choose between:
2h
TIMER
: 2h - by pressing this key once, you set the equipment to
2 h
turn off after two hours.
5h
: 5h - by pressing this key once, you set the equipment to
5 h
turn off after five hours.
8 h
8h
: 8h - by pressing this key once, you set the equipment to
turn off after eight hours.
These settings will be acknowledged by a yellow LED on the elec-
tronic panel.
To change the equipment's operation time, just press the key for
the newly desired selection. Just bear in mind that, by performing
this change, you will be canceling the previous setting and starting
a new one, and the newly selected time will be counted from the
moment of change.
To cancel a program setting, just press the same key that was
used to activate it. The canceling of the "TIMER" mode will be
acknowledged by the turning off of the yellow LED on the elec-
tronic panel.
(FAN) mode, the temperature LEDs will
: HIGH: by pressing this key, your air conditioner
: LOW: by pressing this key, you air conditioner
13