Axxess GMOS-044 Instrucciones De Instalación página 4

Testing the GMOS-044
Chime Volume Adjustment
To adjust the chime volume, use a small screwdriver to rotate the potentiometer,
located on the 16-pin harness side of the interface, clockwise to make the chime
louder and counterclockwise to make the chime softer.
Onstar Level Adjustment
To adjust the Onstar volume level find the Black/Yellow wire on the 22-pin
harness. Push the blue Onstar button, while the voice is speaking tap the
Black/Yellow wire to ground. There are 4 volume settings for Onstar; once the
4th setting is reached and the Black/Yellow wire is tapped to ground it will
automatically go back to the first volume setting. Once the volume is set it will stay
at that volume until the Black/Yellow wire is tapped to ground again.
12-pin Harness
The 12-pin harness that is attached to
the GMOS-044 is for use with the
ASWC-1 (sold separately). Please refer to
the ASWC-1 instructions for programming
and operation.
GMOS-044
Personalization menu
Your vehicle must be equipped with OE steering wheel controls in order to access
or change the personalization features in your vehicle. For the Chevy Cruze, if your
vehicle did not come equipped with OE steering wheel controls, please refer to the
"No OE Steering Wheel Control Section" of this manual.
Note: Personalization menu can be set before the factory radio is removed. Time
and date cannot be adjusted in vehicles without the factory steering wheel controls.
Note: OE Screen can be disconnected in models without factory steering
wheel controls.
1. Turn off your aftermarket radio.
2. Press and hold the Off Hook button on the steering wheel for 3-seconds. After
3-seconds the personalization menu will show up on the display.
3. To scroll through the menus, use the Seek Up and Seek Down buttons on the
steering wheel.
4. To make a selection, use the Source button on the steering wheel which is the
center button between the Seek Up and Seek Down buttons.
5. Use the Off Hook button to exit the personalization menu.
4