Identification - Plate Data (Fig. 2); Transport (Fig. 3); Acceptance And First Cleaning; Installation And Environmental Conditions(Fig. 3) - Arneg Pelican Manual De Instalacion Y Uso

Pelican
English
4
6
5
7
8
The weight of water vapor in dry air is one of the main points that affect the performance and
power consumption of the cabinets
Declaration of A copy of the conformity statement is annexed to the cabinet
conformity
If you lose the original copy of the Declaration of Conformity supplied with
the cabinet, download a copy by filling out the form available on the internet
addresses:
- for Italy: http://www.arneg.it/conformita/it
- overseas: http://www.arneg.it/conformita/en

4. Identification - Plate data (Fig. 2)

A serial plate is affixed behind the units, stating all characteristic data:
1) Manufacturer's name and address
2) Unit name and length
3) Unit code
4) Unit serial number
5) Voltage supply
6) Supply frequency
7) Current used when operating
8) Electrical power used when operating during refrigeration phase (Lighting + fans + hot cables)
9) Electrical power used when operating during defrost phase (Lighting + fans + hot cables + defrost
resistances)
10) Lighting power (where applicable)
11) Net display surface
12) Useful load volume
13) Type of refrigerant fluid with which the system functions
14) Environmental climatic class and temperature of reference
15) Humidity protection class
16) Unit manufacturing order number
17) Unit production order number
18) Unit year of production
To identify the unit when requesting technical assistance, you need simply provide the following:
- the product name(2); the serial number (4); the order number (16)

5. Transport (Fig. 3)

The cabinets are supplied on a wooden support fixed to the base for movement with forklift trucks.
Always position the forks at the point specified on the wooden support to avoid the risk of over-
turning. Use a manual or electrical forklift truck that is suitable to moving the cabinet in question. It
must have a nominal capacity of at least 1,000 kg.

6. Acceptance and first cleaning

Upon acceptance of the cabinet:
- ensure that the packaging is intact and there is no obvious damage;
- unpack, ensuring you do not damage the cabinet;
- check all parts of the cabinet, ensuring that all parts are intact;
- should damage be reported, call the supplier immediately;
- clean for the first time using neutral products. Dry with a soft cloth. Do not use any abrasive
substances or metal sponges;
- do not use alcohol or similar to clean the methacrylate parts (Plexiglas).
For correct disposal of the packaging, please consider that it consists of:
Wood - Polystyrene - Polythene - PVC - Cardboard.
In accordance with Directive EEC 94/62, we declare the suitability of the above-specified materials.

7. Installation and environmental conditions(Fig. 3)

Do not position the cabinet:
30
30 55
27 70
40 40
35 75
23,9 55
20,0 14,8
21,1 15,8
23,9 18,8
30,0 27,3
14,3 10,2
05060104 01 01/09/2015