For Your Safety; Intended Use; Safety Instructions - Flex WS1505FR Instrucciones De Funcionamiento

Long-necked renovation sander WS 1505FR

For your safety

Danger!
Before using the long-necked sander,
please read and follow:
– these operating instructions,
– the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no. 315.915/04.04),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This long-necked sander is state of the art
and has been constructed in accordance
with the acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The long-
necked sander may be operated only if it is
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Noise
Caution
Wear ear protection at a sound pressure
above 85 dB(A).
Measured according to EN 60745:
:
Sound pressure L
Sound power L
WA
Vibration
Weighted effective value of acceleration
according to EN 60745: 4,5 m/s²
dB(A)
PA
dB(A)

Intended use

Hand-operated long-necked sander with
swivel head which adjusts itself to the work
surface,
– for working in a standing position in
difficult-to-access locations,
– for sanding ceilings, high walls and
machining floors with diamond grinding
wheels.
Also suitable for removing paint, coatings,
adhesive remnants, loose plaster and
concrete burrs from shuttering as well as for
roughing screed and aligning butt joints.
Use only original FLEX diamond wheels
with special tool holder.
The diamond wheels must be designed for
min. 5500 r.p.m.
To maintain a clean working environment,
operate the integrated dust extractor while
sanding. Use the FLEX special extractor
S 36 M with fine filter system.

Safety instructions

n When using the power tool, wear
protective equipment:
Goggles, dust mask, ear protection,
protective gloves, non-slip safety shoes.
If dust is hazardous, e.g. quartz sand,
wear a dust mask in accordance with
DIN/EN 149!
Recommended filter class: P2
n Provide good ventilation in the work
place, operate the appliance with dust
85
extractor only.
n Do not machine materials which release
98
hazardous substances.
n Do not machine materials which contain
asbestos!
n Refrain from sanding paint which
contains lead or other harmful
substances.
Danger!
11