HQ-Power VDP1500ST Manual De Usario
Ocultar thumbs Ver también para VDP1500ST:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Enlaces rápidos

VDP1500ST – 1500W MUSIC / DMX-CONTROLLED STROBOSCOPE
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDP1500ST! If the device was damaged in transit, don't install or use it and contact your
dealer. Please read the manual thoroughly before bringing this device into service.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• There may be some smoke or a particular smell when the device is activated for the first time. This is normal and
any smoke or smell will gradually disappear.
• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
• When the front glass pane is damaged, it MUST be replaced!
3. General Guidelines
• This device is designed for professional use on stage, in discos, theatres, etc. The VDP1500ST should only be
used indoors with an alternating current of max. 230V AC/50Hz.
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat, dust and moisture. Respect a minimum
distance of 0.5m between the device's light output and any illuminated surface.
• Use an appropriate safety cable to fix the device (e.g. VDLSC8).
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
VDP1500ST
1
VELLEMAN

Publicidad

Tabla de contenido
loading

Resumen de contenidos para HQ-Power VDP1500ST

  • Página 1 If in doubt, contact your local waste disposal authorities. Thank you for buying the VDP1500ST! If the device was damaged in transit, don't install or use it and contact your dealer. Please read the manual thoroughly before bringing this device into service.
  • Página 2 Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the VDP1500ST. Multiple VDP1500STs can be linked through serial linking. The linking cable should be two core, screened cable with XLR input and output connectors.
  • Página 3: Function Selection

    OFF – ON – ON – ON ON – ON – ON – OFF 15 (fast) ON – ON – ON – ON Music control This function sets the device to music-controlled. Switches 1-8 must be ON, switches 9 and 10 must be OFF. VDP1500ST VELLEMAN...
  • Página 4: Cleaning And Maintenance

    453 x 136 x 207mm Total Weight 5.6kg The information in this manual is subject to change without prior notice. VDP1500ST – 1500W MUZIEK / DMX-GESTUURDE STROBOSCOOP 1. Inleiding en kenmerken Aan alle ingezetenen van de Europese Unie Belangrijke milieu-informatie betreffende dit product Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt weggeworpen, dit toestel schade kan toebrengen aan het milieu.
  • Página 5: Algemene Richtlijnen

    • Laat een geschoolde technicus dit toestel installeren conform EN 60598-2-17 en andere toepasselijke normen. • De draagconstructie moet gedurende 1 uur 10 x het gewicht van dit toestel kunnen dragen zonder te vervormen. • Maak het toestel ook vast met een veiligheidskabel. VDP1500ST VELLEMAN...
  • Página 6 DMX-512 verbindingen Verbind de meegeleverde XLR-kabel met de vrouwelijke 3-pins XLR-uitgang van uw controller en de mannelijke 3-pins XLR-ingang van de VDP1500ST. U kunt meerdere VDP1500STs serieel verbinden. De verbindingskabel moet een beschermde kabel zijn met dubbele kern en met een XLR in- en uitgangsconnector. Zie het diagram rechts.
  • Página 7: Reiniging En Onderhoud

    Stroomonderbreker Lamp (meegelev.) 1500W strobolamp (bestelcode LAMP1500W) DMX in/out 3-pins vrouwelijke & mannelijke XLR stekker Afmetingen 453 x 136 x 207mm Totaal gewicht 5.6kg De informatie in deze handleiding kan te allen tijde worden gewijzigd zonder voorafgaande kennisgeving. VDP1500ST VELLEMAN...
  • Página 8: Prescriptions De Sécurité

    VDP1500ST – STROBOSCOPE 1500W PILOTE PAR LA MUSIQUE / DMX 1. Introduction et caractéristiques Aux résidents de l'Union Européenne Des informations environnementales importantes concernant ce produit Ce symbole sur l'appareil ou l'emballage indique que, si l'appareil est jeté après sa vie, il peut nuire à l'environnement.
  • Página 9 • Transportez l'appareil dans son emballage originel. • Toute modification de l’appareil est interdite pour des raisons de sécurité. • N’utilisez votre VDP1500ST qu’à sa fonction prévue. Tout autre usage peut causer des courts-circuits, des brûlures, des électrochocs etc. Un usage impropre annule d'office la garantie.
  • Página 10 Connexion DMX512 Connectez la sortie XLR femelle 3 broches de votre contrôleur avec l’entrée XLR mâle 3 broches de votre VDP1500ST à l’aide du câble XLR inclus. Plusieurs VDP1500ST peuvent être connectés en série. Utilisez un câble blindé à double fil conducteur avec des connecteurs XLR d’entrée et de sortie.
  • Página 11: Nettoyage Et Entretien

    Si tiene dudas, contacte con las autoridades locales para eliminación. ¡Gracias por haber comprado el VDP1500ST! Lea cuidadosamente las instrucciones del manual antes de usarlo. Si el aparato ha sufrido algún daño en el transporte no lo instale y póngase en contacto con su distribuidor.
  • Página 12: Instrucciones De Seguridad

    3. Normas generales • Este aparato es un efecto de luz para uso profesional en una discoteca, un teatro, etc. El VDP1500ST sólo está permitido para una conexión con una fuente de corriente CA de máx. 230Vca/50Hz y para el uso en interiores.
  • Página 13: Instalación

    Conecte la salida XLR hembra de 3 polos de su controlador con el cable XLR incluido a la entrada XLR macho de 3 polos del VDP1500ST. Es posible conectar varios VDP1500ST en serie. Utilice un cable XLR blindado con dos hilos conductores con dos conectores XLR de entrada y de salida.
  • Página 14: Seleccionar La Función

    OFF – ON – OFF – OFF OFF – ON – OFF – ON ON – ON – OFF – OFF ON – ON – OFF – ON OFF – OFF – ON – OFF OFF – OFF – ON – ON VDP1500ST VELLEMAN...
  • Página 15: Limpieza Y Mantenimiento

    Falls Zweifel bestehen, wenden Sie sich für Entsorgungsrichtlinien an Ihre örtliche Behörde. Danke für den Kauf des VDP1500ST! Überprüfen Sie, ob Transportschäden vorliegen. Sollte dies der Fall sein, verwenden Sie das Gerät nicht und wenden Sie sich an Ihren Händler. Lesen Sie vor Inbetriebnahme diese Bedienungsanleitung sorgfältig durch.
  • Página 16: Sicherheitsvorschriften

    3. Allgemeine Richtlinien • Dieses Gerät ist eine Lichtsteuerung für den professionellen Einsatz auf Bühnen, in Discotheken, Theater, usw. Das VDP1500ST ist nur für den Anschluss an einen AC-Strom von max. 230Vac/50Hz zugelassen und wurde ausschließlich zur Verwendung in Innenräumen konzipiert.
  • Página 17 • Der elektrische Anschluss darf nur von einer Fachkraft durchgeführt werden. • Schließen Sie das Gerät über den Stecker an das Netz an. Lichteffekte sollten im Allgemeinen nicht über Dimmerpacks geschaltet werden. • Die Installation muss vor Inbetriebnahme von einem Experten genehmigt werden. VDP1500ST VELLEMAN...
  • Página 18 Verbinden Sie das mitgelieferte XLR-Kabel mit der 3-poligen XLR- Ausgangsbuchse des Steuergerätes und die andere Seite mit dem 3- poligen XLR-Eingang des VDP1500ST. Verschiedene VDP1500STs können seriell miteinander verbunden werden. Die Verbindungskabel sollten ein zweiadriges, abgeschirmtes Kabel mit XLR-Eingangs- und Ausgangsanschlüssen sein.
  • Página 19: Reinigung Und Wartung

    7. Außer der Lampe, gibt es keine wartbaren Teile (siehe “4. Installation”). 8. Bestellen Sie Ersatzteile bei Ihrem Vertragshändler. 7. Technische Daten Stromversorgung max. 230Vac/50Hz max. 16A Leistungsschalter Lampe (mitgeliefert) 1500W Stroboskoplampe (Artikelnummer LAMP1500W) DMX EIN/AUS 3-polige(r) XLR-Buchse/Stecker Abmessungen 453 x 136 x 207mm Gesamtgewicht 5.6kg Alle Änderungen vorbehalten. VDP1500ST VELLEMAN...

Tabla de contenido