Manual Cleo.2_PSH 31/05/11 17:07 Página 10
Instruction Manual for Series Cleo.2
2.7 Level of sound
The level of the sound of the pumps is minor than 70 dB.
2.8 Weights and measures of packing
Type
Cleo.2 370
Cleo.2 550
Cleo.2 750
Cleo.2 900
Cleo.2 1100
Cleo.2 1500
Installation
3
The pumps series CLEO.2 settle normally in SPA.
The pump must be mounted on a solid base guarding an horizontal axis. The suction line
must have minimum the same diameter than the mouth of aspiration of the pump. If the suc-
tion line exceeds 10 meters, the lost ones of pressure must be considered, to install the pipes
so that the training of air bags would be avoided especially in its interior, in the suction line.
The following figure shows a correct pipe.
Fig. 1
The pipes must be mounted so that, that the tensions caused by temperature variations do
not affect the pump.
If the pump is installed with the pipes of great length, then these must have a suitable sup-
port in front and behind the pump, is advisable to place in the impulsion an antiram or check
valve.
All manuals and user guides at all-guides.com
Weight (Kg.)
6,3
6,8
7,2
8,5
9,6
10,5
Measures (mm.)
380x190x240
380x190x240
380x190x240
425x220x260
425x220x260
425x220x260