BOND MANUFACTURING HYPH4601-10 Manual Del Usuario página 10

OPERATION
1. Check and ensure a
chamber and has power . .
outside.
2. Ensure the control knob is OFF,slowly open the gas
cylinder valve.
3. Press and turn the
control knob to PILOT
position and hold in for
1 full minute.
4.Push the igniter to
generate spark while
keeping control knob
in depressed position.
5. Check for pilot
6
7
8
9
WARNING: If lighting steps are not followed exactly,
a fire or explosion may result causing property dam-
age, personal injury or loss of life.
AA battery inside the ignition
Ensure the anode(+) faces
Keep the appliance area clear and free
from combustible
other flammable vapors and liquids.
Don't obstruct the flow of combustion and
ventilation air. Keep the ventilation openings
of cylinder enclosure free and clear from
debris.
Cleaning the appliance, including special
surfaces, with recommended cleaning
agents, if necessary.
10
Observe flame height when lit:
Flame should possibly be a yellow/
blue color between 20 to 28 inches
high.
Flame
height
materials, gasoline and