Working Principle; Before Using Your New Ceramic Hob; Technical Specification; Operation Of Product - EAS ELECTRIC EMCH295-3F Manual Del Usario

Ocultar thumbs Ver también para EMCH295-3F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.4 Working Principle

This ceramic cooker hob directly employs resistance wire heating, and adjust the output power by the
power regulation with the touch controls.

2.5 Before using your New Ceramic Hob

Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your ceramic hob.

2.6 Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size D×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.

3. Operation of Product

3.1 Touch Controls

The controls respond to touch, so you don't need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.
EMCH295-3F
3 Zones
220-240V~ 50/60Hz
5200-6200W
590X520X55
560X500
8
V.1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido