Martin System TT200 Manual Del Usuario página 8

REmoTE coNTRoL
FRoNT SIDE
1. buzzer
2. upward
arrow
3. downward
arrow
coLLaR
FRoNT SIDE
11. battery cover
14
REmoTE coNTRoL
LaTERaL RIghT SIDE
4. eggtimer
5. intensity
level
6. LCD screen
9. red point
7. send
stimulation
8. on/off
10. probes
12. round point
13. LED
1. USE
The Martin System «Tiny Trainer» training collar has been designed for dog
training.
When the collar is placed on the dog's neck it can generate impulses to main-
tain the dog's attention, thanks to a remote control. This will make educating
your dog easier. You can modify the intensity of the impulses on the remote,
which makes the collar ideal for any kind of dog, in any situation. A beep-
sound can be produced independently of or during the stimulation, and if re-
peated, it will create a Pavlov conditioned reflex.
The «Tiny Trainer» training collar is designed to respect animal welfare. It re-
spects ECMA technical recommendations and current European regulations.
1.1 Switch on/off of the remote control
To switch the remote on, briefly touch any button on the keyboard. The
LCD screen will then indicate the intensity level, and the selected pro-
gram. If you switched on the remote by touching the impulse-key, you
will have to touch it another time to send an impulse. Switch the remote
off by touching briefly the on/off key, or wait 1 minute as it will switch
off automatically
1.2 Switch on/off of the collar
To switch the collar on or off, hold the red point on the right side of the
remote against the point on the front side of the collar. The collar will play
an ascending melody when it's switched on, and a descending melody
when it's switched off. The LED on the front side of the collar will start
flickering green when the collar is switched on.
EN
15