Stopping The Generator - Firman RD9000E Manual Del Propietário

STOPPING THE GENERATOR

(a) Turn off the power switch of the electric equipment or unplug the cord from receptacle of the
generator.
(b) Allow the engine about 3 minutes to cool down at no-load before stopping.
( c)Turn the selector switch to the "OFF" position.
(d) Press the IGNITION SWITCH to "OFF" position.
(e) Turn the BATTERY SWITCH to the "OFF" position.
[CAUTION]
Always ensure that the Selector Switch and the Ignition Switch are in the "OFF" position
when the engine is not in use.
Always ensure that the Battery switch are in the "OFF" position when the engine
is not in use.
NOTE:
When turning off the generator after LPG operation, turn the fuel knob on LPG
cylinder off too. Make sure it is in the fully closed position.
If the engine will not be used for a period of two weeks or longer, please see the
Storage section for proper engine and fuel storage.
Page 21