Cleaning Fuel Strainer - Firman RD9000E Manual Del Propietário

CLEANING AND ADJUSTING THE SPARK PLUG
(a) If the plug is contaminated with carbon,
using a plug cleaner and wire brush.
(b) Adjust the electrode gap to 0.7 to
0.8 mm (0.028" to 0.031").
SPARK PLUG: TORCH F6RTC equivalent.

CLEANING FUEL STRAINER

Dirt and water in the fuel are removed
by the fuel strainer.
(a) Remove the strainer cup and throw
away water and dirt.
(b) Clean the screens and strainer cup
with gasoline.
(c) Tightly fasten the cup to main body,
making sure to avoid fuel leak.
Page 24