Installing Windows - ASROCK P4VM900-SATA2 Manual Del Usuario

2.10 2.10 2.10 Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.10 2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.11 2.11 2.11 HDMR Card and Driver Installation 2.11 2.11 HDMR Card and Driver Installation HDMR Card and Driver Installation HDMR Card and Driver Installation HDMR Card and Driver Installation
If you do not insert HDMR card to this motherboard, and you finish installing all
drivers to your system now, but in the future, you plan to use HDMR card function
on this motherboard, please follow the steps below then.
1. Insert HDMR card to HDMR slot on this motherboard. Please make sure that the
HDMR card is completely seated on the slot.
2. Install HDMR card driver from our support CD to your system.
3. Reboot your system.
2.12 2.12

Installing Windows

Installing Windows
2.12 2.12 Installing Windows 2.12 Installing Windows Installing Windows
Functions Functions Functions Functions Functions
If you want to install Windows
with RAID functions, please follow below procedures according to the OS you
install.
2.12.1 Installing Windows 2.12.1 Installing Windows
2.12.1 Installing Windows 2.12.1 Installing Windows 2.12.1 Installing Windows
If you want to install Windows
functions, please follow below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
2 0 2 0 2 0 2 0 2 0
2000 / XP / Vista 2000 / XP / Vista
2000 / XP / Vista 2000 / XP / Vista 2000 / XP / Vista
®
® 2000 / XP / Vista
2000 / XP With RAID Functions 2000 / XP With RAID Functions
2000 / XP With RAID Functions 2000 / XP With RAID Functions 2000 / XP With RAID Functions
®
®
2000 / XP on your SATA / SATAII HDDs with RAID
Advanced screen
ASRock P4VM900-SATA2 Motherboard
With RAID With RAID
With RAID With RAID With RAID
TM TM TM TM TM
TM OS on your SATA / SATAII HDDs
IDE Configuration.