Introduction
Thanks for purchasing the GPO Bermuda. You are now the
proud owner of a British design classic, based on the legendary
Dansette Bermuda which graced homes the length and breadth
of the country. To get the most from your new turntable, please
read these instructions carefully before use, and store them in a
safe place for future reference.
This package contains
1x GPO Bermuda
1x Turntable Needle (fitted)
1x RCA Auxiliary Out Cable
1x DC Power Cable
1x 45 RPM Adapter
4x Protective Screw Caps (fitted)
4x Legs
1x Manual
Unpacking
To unpack your GPO Bermuda, please follow these steps:
To unpack your GPO Bermuda, please follow these steps:
1. Remove all packing materials and set the unit on a flat,
1. Remove all packing materials and set the unit on a flat,
supportive surface.
supportive surface.
2. Remove all of the additional items as listed above. Please
2. Remove all of the additional items as listed above. Please
note, the turntable needle and protective screw caps are
note, the turntable needle and protective screw caps are
shipped attached to the unit.
shipped attached to the unit.
3. Undo the two clasps on either side of the lid.
3. Undo the two clasps on either side of the lid.
4
GPO_Bermuda_EU_Manual.indd 4
4.
5.
6.
7.
8.
9.
To
1.
2.
3.
4.
5.
6.
7.
8.
9.
14/09/2016 12:29