Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

PROGRAMMING

1. Open the driver's door, and keep open during the programming process.
2. Cycle the ignition on and wait until the climate control lights turn blue.
Note: If the lights don't turn blue, unplug port C from the tactile panel for a few seconds,
then try again.
3. Test all functions of the installation for proper operation, before reassembling the dash.
Note: The compass in the driver's information center will no longer be functional.
10
FINAL ASSEMBLY
1. Secure the completed assembly into the upper dash using the factory hardware removed in
Dash Disassembly, step 7.
2. Snap the radio trim panel over the completed assembly, then reassemble the dash in reverse
order of disassembly to complete the installation.
|
386.257.1187
MetraOnline.com

Publicidad

loading