Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws • E) (2) PC-7871 Panel clips • F) (12) #8 x 1/2" Phillips screws
A
B
Metra. The World's Best Kits.
®
Hyundai Genesis Coupe (w/o NAV)
Visit
MetraOnline.com
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted Matte Black
C
D
F
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
E
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-7352B
I N S TA L L AT I O N I N S T R U C T I O N S
2013-2015
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304 •AX-HYKIA1-SWC
& AX-HYKIA-SPDIF (for amplified models)
Antenna Adapter: Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Small flat-blade screwdriver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 2/7/19 INST99-7352B

Publicidad

loading

Resumen de contenidos para Metra 99-7352B

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 2/7/19 INST99-7352B...
  • Página 2 DASH DISASSEMBLY 1. Unclip and remove the shifter trim 5. Remove (4) Phillips screws securing panel. (Figure A) the factory gauges to the radio/climate control panel. (Figure E) 2. Unclip and remove the display trim 6. Remove (4) Phillips screws securing panel above radio.
  • Página 3 (Figure A) 3. Attach the factory gauges to the radio 3. Locate the factory wiring harness housing using (4) #8 x 1/2” Phillips and antenna plug in the dash. Metra screws provided. (Figure B) recommends using the proper mating (Figure A) (Figure A) adapters from Metra and/or AXXESS.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 2/7/19 INST99-7352B...
  • Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 2/7/19 INST99-7352B...
  • Página 6 DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel de moldura 5. Quite los (4) tornillos Phillips que sujetan de la palanca de velocidades. (Figura A) los indicadores de fábrica al panel de control del radio/clima. (Figura E) 2. Desenganche y quite el panel de la 6.
  • Página 7 3. Ubique el arnés de cableado de fábrica 3. Coloque los indicadores de fábrica a y el conector de la antena en el tablero. la carcasa del radio utilizando los (4) Metra recomienda el uso de adaptadores (Figura A) (Figura A) tornillos Phillips #8 x 1/2” suministrados.
  • Página 8 Tenga el vehículo separado y listo para realizar los pasos de solución de problemas antes de ponerse en contacto con el soporte técnico de Metra / Axxess. EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y...