Haier QSS740 Manual Del Usuario página 7

SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
OVEN SAFETY INSTRUCTIONS
• Stand away from the range when opening the oven
door. Hot air or steam which escapes can cause burns
to hands, face and/or eyes.
• Do not use the oven if a heating element develops a
glowing spot during use or shows other signs of damage.
A glowing spot indicates the heating element may fail
and present a potential burn, fire, or shock hazard. Turn
the oven off immediately and have the heating element
replaced by a qualified service technician.
• Keep the oven vent unobstructed.
• Keep the oven free from grease buildup. Grease in the
oven may ignite.
• Place oven racks in desired location while oven is cool.
If rack must be moved while oven is hot, do not let pot
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective shipping film with
your fingers and slowly peel it from the appliance surface. Do
not use any sharp items to remove the film. Remove all of the
film before using the appliance for the first time.
READ AND SAVE THESE INSTRUCTIONS
49-2000682 Rev. 0
holder contact hot heating element in oven.
• When using cooking or roasting bags in the oven, follow
the manufacturer's directions.
• Pull the oven rack to the stop-lock position when
loading and unloading food from the oven. This helps
prevent burns from touching hot surfaces of the door
and oven walls.
• Do not leave items such as paper, cooking utensils or
food in the oven when not in use. Items stored in an
oven can ignite.
• Never place cooking utensils, pizza or baking stones,
or any type of foil or liner on the oven floor. These
items can trap heat or melt, resulting in damage to the
product and risk of shock, smoke or fire.
To assure no damage is done to the finish of the product, the
safest way to remove the adhesive from packaging tape on new
appliances is an application of a household liquid dishwashing
detergent. Apply with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It
cannot be removed if it is baked on.
7