Napa 791-1250 Manual Del Usuario

This operaTing manual conTains
imporTanT safeTy informaTion.
read carefully and undersTand all
informaTion before operaTing Tool.
save This manual for fuTure use.
owner/user responsibiliTy
The owner and/or user must have an understanding of the
manufacturer's operating instructions and warnings before using
this equipment. Personnel involved in the use and operation of
equipment shall be careful, competent, trained, and qualified
in the safe operation of the equipment and its proper use
when servicing motor vehicles and their components. Warning
information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer's
instructions and warnings shall be read to and discussed
with the operator in the operator's native language by the
purchaser/owner, making sure that the operator comprehends
its contents.
Owner and/or user must study and maintain for future
reference the manufacturer's instructions. Owner and/or user
is responsible for keeping all warning labels and instruction
manuals legible and intact. Replacement labels and literature
are available from the manufacturer.
producT descripTion
The 10,000psi Air-Hydraulic Pump is designed to operate
on as little as 7.8 CFM @ 90psi. This pump allows quick
displacement of hydraulic fluid, up to 10,000psi, to comparable
rams, presses, spreaders, compactors and crimping machines,
anywhere that 10,000psi of fluid pressure is needed.
Foot/Hand Actuated treadle design delivers a metered,
controllable flow to and from the intended application.
noTe: Always check connections before using!
specificaTions
model
791-1250
791-1250
capacity pump size (l x w x h )
10,000psi 10-1/4" x 5-1/4" x 7-3/8"
Read and undeRstand all waRnings, instRuctions and owneR's
manual infoRmation befoRe attempting to use this equipment.
buRst hazaRd exists if hose oR connection pRessuRe exceeds Rated
pRessuRe. do not exceed the Rated capacity of this device.
use gauge oR otheR load measuRing instRument to veRify
suitable application. always inspect hoses and connections foR
damage pRioR to use.
always weaR adequate eye pRotection when opeRating this
equipment. always ensuRe that the chosen application is suitable,
stable to woRk on and aRound.
do not woRk undeR a lifted load without adequately Rated
suppoRt devices.
this device is not suitable foR use as suppoRt device!
do not subject the pump and its components to shock loads.
do not connect to application which can RetuRn moRe oil to the
ReseRvoiR than the pump ReseRvoiR can hold.
failuRe to heed these waRnings can Result in seveRe, even fatal
injuRy as well as pRopeRty damage.
volume of h.d. oil
(91.5 cu. inches)
1
model# 791-1250
10,000psi
Air-HydrAulic
oil outlet size
1500cc 3/8" NPT
PumP
11/01/07