Converting Between Scales; Using The Counter - Calculated Industries Scale Master Classic 6020 Guia Del Usuario

(Cont'd)
[RESET] + [M1+]
Clears the value stored in the
[RESET] + [M2x]
Clears the value stored in the
[RESET] + [RCL]
Clears values stored in memory

Converting Between Scales

The Scale Master Classic can automatically
convert values between scales. For example, 20
feet rolled in 1/16
10 feet in 1/8
value in one scale and then add that exact value
(unconverted) to a value rolled in another scale.
1) Roll a value and press
[SCALE]
2) Roll another value and press
3) Press
[RCL] [M1+]

Using the Counter

You can use the
count items such as electrical outlets, drains, etc.
Press [MODE]
mode. Then press the
key to count the items.
You can use the
keys to store or accumulate the counts for two
different items. After you have a count value,
press
[M1+]
8 – Scale Master
"
scale will be converted to
"
scale. You may want to roll a
to change scales.
to recall the combined total.
[SUBTRACT/COUnT]
until you find the "
[SUBTRACT/COUnT]
[M1+]
or to store it.
[M2x]
Classic
®
memory register.
M1+
memory register.
M2x
M1+
[M1+]
and [M2x]
and .
M2x
. Press
.
[M1+]
key to
"
count
memory