Locking Modes, Scales And Units; Turning The Clicker & Beep On/Off; Using The Custom Scale/Ruler; Memory Function Keystrokes - Calculated Industries Scale Master Classic 6020 Guia Del Usuario

Locking Modes, Scales and Units

Your Scale Master Classic comes equipped
with a lock switch that prevents inadvertently
changing drawing scales. When the lock is
activated, a lock symbol will be displayed in the
LCD. While active, the Mode, Scale and Units
cannot be revised.
Turning the Clicker & Beep On/Off
To toggle the rolling click off or on, press
[RESET] +
" " and error/notification beep off or on.
count

Using the Custom Scale/Ruler

The default value (after a Clear All/Software
Reset) for Custom Scale is one-to-one (e.g.,
1 inch equals 1 inch). This lets you use your
Scale Master Classic as a rolling ruler, which is
especially useful for measuring irregular shapes.
1) To reset your Custom Scale setting to a one-
to-one ratio, press
COUnT]
2) Then press the
"
custom
3) Begin rolling.

Memory Function Keystrokes

[RCL] [M1+]
Displays the value stored in the
[RCL] [M2x]
Displays the value stored in the
[SCALE] . This will also toggle the
to perform a Clear All.
[MODE]
" mode appears.
+
[RESET]
key until the
M1+
M2x
[SUBTRACT/
memory register.
memory register.
(Cont'd)
7 – User's Guide