Qstarz Beyond Navigation BT-Q1000 Platinum Guía De Instalación Rápida página 6

English
..................................................................................................................................................................
7. <Photo> \ <Write GPS Info into Photos>
will save the latitude, longitude, and altitude information into photo.
A progress window will show the writing progress.
8. <File> \ <View in Google Earth>
will invoke Google Earth to view the tracks and photos. Please install Google Earth
previously in order to activate this feature.
H. Navigate as a Bluetooth GPS Receiver with handheld device
H‐1 Activate the Bluetooth function in your PDA/Smart phone or PC
Before activating the Bluetooth function in your PDA/PC, please switch BT‐Q1000P
to <NAV> position for paring and check if your device is equipped with Bluetooth
function. If not, you may need to acquire an optional CF/SD Bluetooth card or
Bluetooth dongle. (The pass code is "0000")
H‐2 Automatically create a shortcut in Bluetooth Manager window
After the pairing complete, the system will then find a quick connect device
"iBT‐GPS" in Bluetooth Manager. In further use, you just need to click it to connect
to this Bluetooth GPS Receiver.
H‐3 Check the Serial Port in Bluetooth Setting
After complete pairing with BT‐Q1000P, please click "Serial Port" to confirm the
assigned COM port. If you use PDA/PC to pair the GPS Receiver, please check
"Outbound COM port".
H‐4 Set correct Serial Port in your map software
Activate your navigation software and make sure to select the correct "Serial
Port".
NOTE 1: In the map software such as TomTom, you might need to change
preference and set "Other Bluetooth GPS" according to PDA/phone model. In
some case please consult map software company to vary the setting if you have
issue on positioning.
..................................................................................................................................................................
www.Qstarz.com
6