Qstarz Beyond Navigation BT-Q1000 Platinum Guía De Instalación Rápida página 7

Beyond Navigation
......................................................................................................................................................................
NOTE 2: There might be specific setting requirement per navigation software.
Such as Tomtom, please delete other GPS settings under Tomtom software, and
keep one only.
H‐5 Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then the Bluetooth
connection will be disconnected automatically. Then put BT‐Q1000P switch to
"OFF" position.
I. Function of Auto On‐Off (Power saving mode)
BT‐Q1000P supports Auto On‐Off (Power saving mode). It can automatically enter
sleeping mode after the Bluetooth connectivity is turned off, so the Blue LED will
turn to flash every 5 seconds. Thus you can always power it on with very low
power consumption.
Under power saving mode, when detecting Bluetooth is being connected,
BT‐Q1000P will auto wake up itself and the blue LED will turn to flash every 1
second and GPS Orange LED will be also On.
Note: Power saving mode would not function if log is enabled.
J. Others
J‐1 LED Indicators
LED Status
Power
(Red/Green)
Bluetooth
(Blue)
.......................................................................................................................................................
www.Qstarz.com
Flash
Low Power (Red)
Fully charged (Green)
Flash per 2 sec.: Bluetooth
connected and
transmitting Mode
Flash per 5 sec.: Power
saving mode
7
ON
Recharging
(Green)
Not GPS not
connected / powered /
Pairing Pairing
under Nav under Log
Mode mode
English
OFF