Adjustable Spray Nozzle; Use Of Chemicals - All-Power 1800PSI Manual Del Usuario

Operating Instructions

Adjustable Spray Nozzle

The adjustable spray nozzle can adjust from fan to jet in the high-pressure position only. The spray is
adjusted by turning the nozzle (See Figure 7)
!
Caution: The jet spray adjustment is very aggressive. We recommend that for most
cleaning application, a 20 degrees spray angle should be used to avoid damage to the surface
being sprayed.
Note: The pressure of the spray on the surface you are cleaning increases as you move the
wand closer to the surface.
To increase to a fan spray, gun counter-clockwise. To decrease angle to jet spray, gun clockwise
Cleaning Chemical Use
!
Caution: Only use cleaning detergents or products recommended for pressure
washers.
!
Caution: Fill and flush the reservoir with clean water after detergents use.
The machine is provided with two tanks, which according to requirements, can be filled with one or two
different detergents. To fill the tanks proceed as follows (See Figure 8)
11
Fig. 7