Product Setup; Connecting Your Equipment - D-Link SharePort Go III DLR-510L Guía De Instalación Rápida

PRODUCT SETUP

CoNNeCtING YoUr eQUIPMeNt

Depending on your equipment, the SharePort Go III can be set up easily from any device with Wi-Fi
and a web browser.
Modem
Laptop
Router
Laptop
3G/4G
Adapter
Router
HotSpot
Laptop
Router
CoNNeCtING to the SharePort Go III
Step 1
Turn on the SHAREPORT GO III by sliding the ON/OFF/Charge switch to ON.
Step 2
On your PC or mobile device, connect to the SHAREPORT GO III's wireless network.
By default, the settings are:
- Wi-Fi Network Name (SSID): DIR510L
- Password: (leave this blank)
Step 3
Once connected, open a web browser on your mobile device or computer and type
http://dlinkrouter.local. or http://dlinkrouter in the address bar.
Step 4
At the login page, enter the Admin Password. By default, it should be left blank. Click Log In.
If the password is not blank or you have forgotten the password, reset the router
by pressing the RESET button with a pin for 5 seconds or more, then release.
DIr-510L
Using a Wired Ethernet Connection:
Connect your DSL/cable modem or wired Internet line to the
SharePort Go III with an Ethernet cable.
Using a 3G/4G USB Adapter:
You will need a compatible 3G/4G USB adapter with an active SIM
card. Please check your local D-Link website for more information.
Plug the 3G/4G USB adapter into the USB port (1 A) on the
SharePort Go III.
Connecting to a Wi-Fi Hotspot:
You will need the Wi-Fi network name and password of the hotspot
you want to connect to.
3