Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
recommended to be performed
with this power tool. (ANGLE
GRINDER) Operations for which the
power tool was not designed may
create a hazard and cause personal
injury.
c) Do not use accessories which
are not specifically designed
and recommended by the tool
manufacturer. Just because the
accessory can be attached to your
power tool, it does not assure safe
operation.
d)
The
rated
accessory must be at least equal
to the maximum speed marked
on the power tool. Accessories
running faster than their rated speed
can break and fly apart.
e) The outside diameter and the
thickness of your accessory must
be within the capacity rating of
your power tool. Incorrectly sized
accessories cannot be adequately
guarded or controlled.
f)
Threaded
accessories
grinder
spindle
accessories mounted by flanges,
the arbour hole of the accessory
must fit the locating diameter of
the flange. Accessories that do not
match the mounting hardware of the
power tool will run out of balance,
vibrate excessively and may cause
loss of control.
speed
of
mounting
must
match
thread.
g)
Do
accessory.
inspect the accessory such as
abrasive wheels for chips and
cracks, backing pad for cracks,
tear or excess wear, wire brush
for
loose
If power tool or accessory is
dropped, inspect for damage or
install an undamaged accessory.
After inspecting and installing an
accessory, position yourself and
bystanders away from the plane
of the rotating accessory and run
the power tool at maximum no-
the
load speed for one minute.
Damaged accessories will normally
break apart during this test time.
h)
Wear
equipment.
application,
safety goggles or safety glasses.
As appropriate, wear dust mask,
hearing
and workshop apron capable
of stopping small abrasive or
workpiece fragments. The eye
protection must be capable of
of
stopping flying debris generated
the
by various operations . The dust
For
mask or respirator must be capable
of filtrating particles generated by
your operation. Prolonged exposure
to high intensity noise may cause
hearing loss.
i) Keep bystanders a safe distance
away from work area. Anyone
entering the work area must wear
personal protective equipment.
not
use
a
Before
each
or
cracked
personal
Depending
use
face
protectors,
damaged
use
wires.
protective
on
shield,
gloves
5
Publicidad
Tabla de contenido
