Promaker PRO-PL1300 Manual Del Usuario página 9

If the supply cord is damaged, it
must be replaced by a specially
prepared cord available through the
service organization.
·Carbon brushes
The brush and commutator of the
tool shall be examined for several
months. Their good
contact makes the tool energetically.
When the spark
commutator become greater the
carbon brushes should be changed.
·Cleaning
Before cleaning or performing
any maintenance,
supply shall be disconnected
from tool. Compressed dry
air blow may be the most effective
cleaning method. Always
safety goggles when cleaning tools
with compressed air.
Ventilation openings and switch
levers must be kept clean. Do not
attempt to clean by inserting pointed
objects through openings.
No chemical agent is allowed to be
used in cleaning the power tool.
·Protecting the environment
Meaning of crossed –out
wheeled dustbin:
Do not dispose of electrical
appliances
municipal waste,
collection facilities.
Contact you local government for
information regarding the collection
systems available.
If electrical appliances are disposed
around the
power
wear
as unsorted
use separate
of in landfills or dumps, hazardous
substances can
groundwater and get into the food
chain, damaging your health and
well-being.
When replacing old appliances with
new ones, the retailer is legally
obligated to take back your old
appliance for disposals at least free
of charge.
ACCESSORIES
· Rubber pad 1pc
· Flange wrench 1pc
· Side handle 1pc
· 180 mm Wool bonnet 1pc
leak into the
9