Description; Prior To First Use; Making Coffee; Cleaning - Krups KT600 Instrucciones De Seguridad

KR_SILVERT-ART-INOX_KT600_NAFTA_OK_Mise en page 1 16/11/10 15:50 Page9

1. DESCRIPTION

1 Main body
2 Filter holder cover
3 Water tank cover
4 Water tank

2. PRIOR TO FIRST USE

n Operate your coffee maker for the first time without coffee using
1 litre of water to rinse the circuit.

3. MAKING COFFEE

(Follow the illustrations 1 to 7)
n This model has a 10 european cups capacity.
n Only use cold water and a n°4 coffee filter paper.
n Do not fill beyond the maximum water level marked on the water tank.
1 - S w i t c h i n g o n y o u r c o f f e e m a k e r :
n Press the transparent button. It will light up with a white light and will
return to its initial position once it is released.
Note: This Model has an automatic stop system at the end of the cycle.
n To keep the jug warm longer, rinse it with hot water prior to use.
n The lid of the isotherm jug must be closed tightly towards the left as far
as possible when making and keeping coffee hot, figure 11.
n To serve the coffee, press down the lever on the lid isotherm jug, figure
10.
n This coffee maker has a non-drip system which allows you to serve
coffee before all of the water has passed through the filter. Place the
isotherm jug back in position rapidly to avoid any overflows.
n Wait for a few minutes before making coffee again.

4. CLEANING

n To remove the used coffee, remove the filter holder from the coffee maker
figures 8 and 9.
n Unplug the appliance.
5 Filter holder
6 Water gauge
7 Isotherm jug
8 ON/OFF switch.
English
9