Automatic Shut-Off Function - Philips Sonicare Airfloss Manual Del Usuario

2 Place the tip between the teeth and apply
gentle pressure. Slightly close your lips over the
nozzle when it is in place, to avoid splashing.
Tip: Use your finger to press the activation button.
Note: The AirFloss is intended to be used on the
front/outside surface of the teeth only.
3 Press the activation button to deliver a single
burst of air and micro-droplets of mouthwash
or water between the teeth. Alternatively,
hold the activation button to deliver
continuous bursts of mouthwash or water
approximately every 1 second.
4 Slide the guidance tip along the gum line until
you feel it settle between the next two teeth.
5 Continue this procedure for all spaces
including behind your back teeth.
6 To switch off the AirFloss, press the on/off
button again.

Automatic shut-off function

The automatic shut-off function automatically
switches off the AirFloss if it has not been used for
4 minutes.
cleaning
Do not clean the nozzle, handle or charger in the
dishwasher.
Do not use cleaning agents to clean the appliance.
EngliSh
11