Design And Function; Pressure Loss - PLYMOVENT MiniMan-100 Instrucciones Para El Uso

design and function

e
d
B
h
a
a.Wall support
b. Inner joint and middle joint with friction brakes.
c. Spring washers in all joints.
d. Flame resistant hose made from PVC coated woven polyamide
with internal steel spiral.
e. Aluminium inner arm tube.
f. Aluminium outer arm tube, with the ability to add a damper as
an accessory.
G. Hood, constructed from aluminium, including safety mesh.
h. Gas spring.
handling
1 Hand grip for the hood/arm.
2 Easy-to reach external support
mechanism.
2
1

pressure loss

The pressure loss chart below shows the average
pressure loss through the MiniMan
The following aspects affect the pressure loss in the MiniMan:
1. The diameter of the arm; Ø 100(4").
2. The air volume through the arm.
3. Number of bends in the arm and the sharpness of the bends.
021213/0 MiniMan-100
d
F
G
c
d
3 Switch for halogene lamp cart-
ridge; see accessories
HL-20/24-100.
4 Switch for manual start/stop of
fan or damper; see accessories
SA-24, ES-90 or ASE-12.
4
3
4
3,5
3
2,5
2
1,5
1
0,5
0
100 150
h
a
d
a.Wall support
b. Inner joint and middle joint with friction brakes.
c. Spring washers in all joints.
d. Flame resistant hose made from PVC coated woven polyamide
with internal steel spiral.
e. Aluminium inner arm tube.
f. Aluminium outer arm tube, with the ability to add a damper as
an accessory.
G. Hood, constructed from aluminium, including safety mesh.
h. Balancing strap.
hood operation
The black, powder coated aluminium hood can be angled
65° to the side, 75° forwards and 120° backwards.
65°
65°
MS-100
200 250
Airflow CFM
e
d
B
c
120°
75°
300 350
MiniMan/100/USA/CAN/3/15
F
d
G
MS-100
400
EN - 3