T&S B-7000 Serie Instrucciones De Instalación Y Mantenimiento página 7

General Instructions
SECONDARY SUPPORT
WARNING: A secondary support chain is required for all objects mounted over head
to protect personnel in case of failure in mounting hardware or structure.
• (Fig. 5) Attach support cable/chain
to one of the slots in guide arm. Other
end of support cable to be attached to
a support other than the main one
supporting the hose reel.
• The safety chain/cable should allow
reel to drop no more than 6 to 12 in.
if primary connection is released.
Adjustment
RATCHET LOCK
CAUTION: To avoid damage to the reel or personnel, always hold on to hose while it is
rewinding. Hazards or unsafe practices which may result in minor personal injury
or product or property damage.
• Ratchet "clicks" four
times every half-spool
revolution.
Note: For B-7102
ratchet clicks fi ve
times every full
revolution.
• (Fig. 6) To latch reel,
slowly pull out hose and
allow it to retract after
clicks 1-4.
• (Fig. 7) To unlatch,
slowly pull out hose until
"clicking" stops, then let
hose rewind until hose
stop rests against guide.
• To disable ratchet, see section in servicing on "Ratchet Lock Replacement/Removal".
Fig. 5
Fig. 6
Fig. 7
7