K2 Pumps SWW05002TPK Manual Del Propietário página 7

For SWW05002TPK, SWW05002VPK, SWW05001VPK, SWW07501VPK,
SWW05001TPK, SWW07501TPK
Before removing pump from basin for service, always disconnect electrical power to pump and control switch.

Submerge pump in a disinfectant solution (bleach) for at least one hour before disassembling pump.

Unscrew the bolts, and remove the volute/gasket.

 Use a flathead screwdriver to hold the shaft, then turn the impeller counter clockwise to release the impeller.
Remove debris from around the shaft and on/under the impeller.

 Reassemble the pump.
SWW05002TPK/ SWW05002VPK
For SWW07503TPK
 Before removing pump from basin for service, always disconnect electrical
power to pump and control switch.
 Submerge pump in a disinfectant solution (bleach) for at least one hour
before disassembling pump.
 Put the pump upside down.
Note: Pump is oil filled, don't incline the pump to void the oil leakage.
 Unscrew the stainless screws, and remove the volute/gasket.
Use a flathead screwdriver to hold the shaft, then turn the impeller

counterclockwise to release the impeller.
 Remove debris from around the shaft and on/under the impeller.
Reassemble the pump.

For Professional Technical Support call 1-844-242-2475
SWW05001TPK/SWW05001VPK/SWW07501TPK/SWW07501VPK
7