Kolcraft Contours Lite Serie Hoja De Instrucciones página 7

S67-T.qxd 4/5/2007 4:00 PM
2
3
4
5
6
Page 7
To Assemble iPod Dok
®
DO NOT turn the iPod
down, unless the Dok is in the closed and
latched position. iPod
Determine which iPod
1
(iPod
30GB iPod
www.apple.com for assistance in deter-
mining which model you have.
If you own the iPod
2
Step 3. For all other models, remove the
iPod
tab and pulling up on the adapter.
Release the snap that holds the iPod
3
Dok in the closed or portable position.
Select the proper donut-shaped protec-
4
tion pad for your iPod
30GB or 20GB iPod
donut-shaped protection pad with
yellow backing paper. For the 60GB or
40GB iPod
protection pad with white backing paper.
Remove the backing paper from the
foam, and place the adhesive side of the
foam pad onto the back of the speaker
housing.
Insert your iPod
5
insert your iPod
adapter. Insert the speaker Jack into
your iPod
For use on a flat surface such as a table
6
top, rest the iPod
the open position. For portable use with
your stroller, push the speaker housing
and the iPod
hear a snap. DO NOT turn the iPod
Dok upside down, unless the Dok is in
the closed or latched position.
Power and volume of the iPod
7
controlled through your iPod
Turn on your iPod
ume of your iPod
N N O O T T E E : : Song volume and clarity will vary
with the quality of the song data that
you downloaded to your iPod
7
(select models)
WARNING
® Dok upside
® could fall out.
® model you own
® mini, 60GB iPod ® , 40GB iPod
® or the 20GB iPod ® ). See
® mini, proceed to
® mini adapter by flexing the snap
® . For the mini,
® , select the thick
, select the thin donut-shaped
®
into the iPod Dok or
® ®
mini into the iPod
®
device.
®
Dok on the surface in
®
cradle together until you
®
Dok are
®
device.
®
and adjust the vol-
®
to a desired level.
®
.
®
® ,
®
®
®